Install Toilet Tank Bolts: Step-By-Step Guide

To install toilet tank bolts, insert them through the holes in the toilet flange. Place washers on the bolts, followed by the toilet tank. Tighten the nuts onto the bolts from the bottom, ensuring they are snug but not overtightened, to secure the tank to the bowl.

The Unsung Hero: Your Adjustable Wrench for Toilet Triumphs

When it comes to tackling a toilet replacement, having the right tools on hand is crucial. And among those tools, the adjustable wrench stands tall as the undisputed star of the show. Picture this: you’re standing in front of your toilet, ready to conquer the plumbing world, and the adjustable wrench becomes your trusty sidekick.

With its magical ability to grip and turn bolts of various sizes, the adjustable wrench is the key to unlocking the secrets of your toilet. It’s like a shapeshifter in the tool kingdom, adapting effortlessly to whatever bolt challenges you throw its way.

The Hidden Power of the Toilet Tank Bolts

One of the adjustable wrench’s most important tasks is tackling the toilet tank bolts. These bolts are the gatekeepers to the toilet tank, keeping it securely attached to the bowl. And when it’s time to replace either the tank or the bowl, your wrench will be there to show those bolts who’s boss.

Conquering Closet Bolts: A Tale of Precision

But the adjustable wrench’s adventures don’t stop there. It’s also the master of closet bolts, the unsung heroes that keep your toilet firmly anchored to the floor. Precision is the name of the game when it comes to closet bolts, and the adjustable wrench brings its A-game, ensuring the perfect fit and preventing any wobbly toilet traumas.

So, next time you embark on a toilet replacement quest, don’t forget your adjustable wrench. It’s not just a tool; it’s a hero in disguise, ready to unbolt the old and embrace the new. With its help, your toilet will be back in action in no time, and you’ll be the king or queen of your own plumbing domain!

Hacksaw (7): Used to cut the closet bolts to the appropriate length.

Hacksaw: The Mighty Blade for Tampering Closet Bolts

Now, let’s talk about the hacksaw, a precious tool that will help you get those closet bolts at the perfect length. It’s like a silvery superhero, ready to conquer stubborn bolts and bring harmony to your toilet installation.

Remember those pesky closet bolts? They’re the ones that anchor your toilet bowl to the floor, ensuring it stays firmly in place. But sometimes, these bolts can be too long, poking out like unruly teenagers at a slumber party. That’s where our trusty hacksaw steps in.

With its sharp teeth, the hacksaw will swiftly and effortlessly cut through the bolts, trimming them down to the perfect size. But wait, there’s a secret to using a hacksaw: don’t rush it! Take your time and use slow, steady strokes. Rushing will only make your cuts uneven and leave you with wobbly toilet bowls.

As you saw, be sure to wear safety glasses. Metal shavings have a knack for flying around like tiny hooligans, so protect your precious peepers. And remember, safety first, folks!

So, there you have it—the mighty hacksaw, your faithful companion in toilet-installation adventures. With its sharp blade and your masterful guidance, those closet bolts will be cut to perfection, leaving you with a toilet that stands tall and proud, like a majestic throne in your humble bathroom kingdom.

Measuring Your Way to a Perfect Toilet Fit: The Importance of a Measuring Tape

When it comes to replacing a toilet, precision is key. And that’s where your trusty measuring tape comes in, like a superhero with its measuring superpowers. It’s not just about making sure your new porcelain throne fits perfectly; it’s about ensuring a watertight seal that keeps those pesky leaks at bay.

Distance to the Flange: A Crucial Measurement

First, you need to measure the distance from the toilet flange (the base that connects the toilet to the drainpipe) to the floor. This will help you determine the right height for your new toilet. Too high, and you’ll feel like you’re perched on a throne; too low, and you might need a step stool to reach it. Find that sweet spot where every visit to the bathroom is a comfortable experience.

The Right Length for Closet Bolts

But wait, there’s more! The measuring tape will also guide you in cutting the closet bolts to the perfect length. These bolts secure the toilet bowl to the floor, so getting this measurement just right is crucial for stability. Imagine an army of microscopic leaks sneaking through the cracks if you don’t nail that measurement!

Other Handy Measurements

Your measuring tape doesn’t stop at toilets. It’s like a magical utility belt for any home improvement project. Measure the length of pipes, mark where you need to drill holes, and ensure your new bathroom fixtures fit like a charm. It’s your secret weapon for a perfectly assembled bathroom that’s the envy of all your DIY-averse friends.

So, grab your measuring tape and let the measuring adventures begin! With precision as your trusty companion, you’ll be the master of your bathroom renovation, conquering every step with confidence and a dash of humor. Happy measuring, my fellow DIY enthusiasts!

Replacing a Toilet: Don’t Let Wax Be Your Nemesis!

Hey there, DIY enthusiasts! Replacing a toilet isn’t rocket science, but there are a few tools and materials you’ll need to tame the wax ring beast. One indispensable tool is our trusty utility knife.

Picture this: You’ve carefully removed the old toilet, and now it’s time to say goodbye to the old wax ring. Enter the utility knife, your sharp and mighty sword. With a few deft strokes, you can cleanly slice through the old wax, making way for a fresh and leak-free seal.

But wax has a sneaky habit of clinging on like an uninvited guest. That’s where the utility knife’s precision comes in. It allows you to trim any excess wax around the toilet base, ensuring a perfect fit for the new ring. No more embarrassing puddles on the bathroom floor!

So, before you dive into your toilet replacement adventure, make sure you’ve got your utility knife at the ready. It’s the secret weapon that will help you conquer the wax ring monster and leave your bathroom sparkling like a throne room.

Replacing a Toilet: The Toilet Flange Blues

Imagine it: you’re about to embark on a noble quest to replace your trusty porcelain throne, only to come face-to-face with an unexpected foe – the toilet flange. This unsung hero is the unsung unsung hero that connects your toilet to the drain pipe, but don’t let its low-key name fool you – it’s an essential part of your plumbing party.

Let’s dive into the world of toilet flanges:

The Role of the Toilet Flange

This unsung hero of your plumbing system is responsible for:

• Keeping the Toilet Steady: It’s the solid foundation that ensures your throne doesn’t become a wobbling dance partner.
• Preventing Leaks: It acts as a watertight seal, stopping sneaky water droplets from escaping into your bathroom.
• Connecting to the Drain Pipe: It bridges the gap between your toilet and the sewer, ensuring waste goes where it belongs.

When to Replace the Toilet Flange

If you’re not sure whether your toilet flange needs a makeover, look out for these signs:

• Cracks or Warping: Over time, wear and tear can take its toll, causing cracks or warping in the flange.
• Leaks: If you notice water pooling around the base of your toilet, the flange could be the culprit.
• Old Age: Even the sturdiest of toilet flanges can’t defy time forever. If yours is more than 20 years old, it might be time for a fresh start.

Replacing the Toilet Flange: A Step-by-Step Guide

Buckle up, DIY warriors! Replacing a toilet flange is a task for the brave, but fear not, for we’ve broken it down into easy steps:

1. Turn Off the Water Supply: No one likes a soggy adventure, so close the water supply valve behind the toilet.
2. Unbolt the Toilet: Say goodbye to your old throne by disconnecting the bolts connecting the tank and bowl.
3. Remove the Old Flange: Carefully lift the toilet off the flange and set it aside. Now, you can use a hacksaw or utility knife to remove the old flange.
4. Inspect and Install the New Flange: Check if the floor is level, and place the new flange in its place. Align the bolts and tighten them securely.
5. Reinstall the Toilet: Place the toilet bowl over the flange and bolt it down. Reconnect the tank and turn on the water supply.

With these steps, you’re on your way to a leak-free, steady porcelain throne. Remember, if you’re not feeling confident, don’t hesitate to call a licensed plumber for help.

Replacing a Toilet: Essential Tools and Materials You’ll Need

The Throne Room Makeover

Replacing a toilet isn’t exactly a walk in the park, but with the right tools and materials, it’s a job that even a bathroom rookie can tackle. Let’s dive into the essentials you’ll need to give your throne room a royal upgrade.

Tools: Your trusty companions

• Adjustable wrench (8): This bad boy will help you loosen and tighten bolts like a pro.
• Hacksaw (7): When you need to cut closet bolts to size, this trusty tool has got you covered.
• Measuring tape (8): Take precise measurements to ensure your new toilet fits perfectly.
• Utility knife (7): Slice through that stubborn wax ring with precision.

Materials: The building blocks of a comfy throne

• Toilet flange (10): This is the foundation upon which your new throne will stand tall.
• Toilet tank (10): The place where water hides before its glorious release into your bowl.
• Wax ring (10): A watertight seal that keeps your bathroom floor dry.

Other Essentials: The supporting cast for a successful replacement

• Toilet tank bolts (10): Secure that tank to the bowl, keeping everything in its rightful place.
• Washers (10): Protect the porcelain from any scratches caused by those bolts.
• Nuts (10): Tighten those bolts from underneath, ensuring a sturdy connection.
• Closet bolts (10): Anchor your toilet bowl to the floor, so you can sit without fear.

With these tools and materials in hand, you’re well on your way to giving your bathroom a much-needed makeover. Next stop: the step-by-step guide to replacing your toilet and restoring your bathroom to its former glory. Stay tuned for the next chapter!

The Wax Ring: The Secret Superhero of Your Toilet

Picture this: you’re enjoying your morning coffee, minding your own business, when suddenly, a silent but deadly leak starts taking over your bathroom. It’s a disaster waiting to happen, but who’s the culprit? Enter the unsung hero of your throne: the wax ring.

This little black beauty may not look like much, but it’s the unsung hero keeping those nasty leaks at bay. It’s like a ninja in the plumbing world, hiding between your toilet and the flange, stopping water from seeping through like a boss.

Now, let’s talk about how this miracle worker does its magic. It’s made of, well, wax, but not just any wax. It’s a special blend that’s designed to create a watertight seal between the toilet and the drain pipe. When you push down on your throne, the wax gets smooshed into place, creating a barrier that even the most determined water molecules can’t penetrate.

Installing a wax ring is pretty straightforward, but here’s a quick tip: make sure you clean the surfaces where it’ll go before you apply it. This will help the wax stick properly and give you a leak-proof seal.

So, if you ever find yourself in the unfortunate position of having to replace a toilet, don’t forget to give the wax ring the respect it deserves. It’s the unsung hero that’s always there to keep your bathroom fresh and leak-free. As I always say, a happy toilet makes for a happy home!

Replacing a Toilet: Tools and Materials You’ll Need… And Why You Need Them

Tools:

• Adjustable wrench: This trusty tool will be your go-to for tightening and loosening bolts, like the toilet tank bolts that keep your throne from wobbling like an unbalanced toddler.

Materials:

• Toilet tank bolts: These bolts play the crucial role of securing your toilet tank to the bowl. Imagine them as the superheroes of your toilet, keeping the top and bottom connected with unbreakable force.

Here’s why you need them:

Without these mighty bolts, your toilet would be like a ship without a rudder, drifting aimlessly. They ensure your toilet tank stays firmly in place, preventing any unwanted surprises like water spraying everywhere while you’re trying to do your business.

These bolts also come with washers and nuts to keep things cozy and secure. The washers act like tiny pillows to protect the porcelain from scratches, while the nuts add extra support, like a backup team of tiny strongmen.

So, make sure you have these bolts on hand when you’re replacing your toilet. Remember, they’re the key to a stable and leak-free throne room.

Replacing a Toilet: Tools and Materials You’ll Need

Tools

…

Materials

…

Washers: The Porcelain Protectors

Ah, washers! The unsung heroes of toilet replacement, the humble yet indispensable tools that make all the difference between a scratched porcelain disaster and a smooth, gleaming masterpiece. These little gems slide right onto the toilet tank bolts, acting as a protective shield to keep them from gouging and marring your pristine porcelain. It’s like slipping on a pair of fuzzy socks for your bolts, ensuring they tread lightly on the precious throne. They may seem insignificant, but trust me, you’ll be eternally grateful for these porcelain protectors when you see your toilet looking as radiant as ever.

Replacing a Toilet: Tools and Materials You’ll Need

Tools

You’ll need an adjustable wrench to loosen and tighten bolts, a hacksaw to cut closet bolts, a measuring tape for measurements, and a utility knife to cut excess wax.

Materials

Nuts (hold those tank bolts in place!)

Nuts are the unsung heroes of toilet replacement. They’re like the sturdy sidekicks who make sure your toilet tank stays securely attached to the bowl. You’ll need a few of these reliable pals to finish the job.

In addition to these essentials, you’ll also need a toilet flange (the base that connects the toilet to the drain pipe), a toilet tank (the water reservoir), a wax ring (the watertight seal), toilet tank bolts, washers, and closet bolts.

Step-by-Step Guide to Toilet Replacement

1. Turn Off the Water Supply

Before you start messing with your toilet, cut off the water supply. This is like putting the brakes on before you change a tire—it prevents a wet and chaotic mess.

2. Remove the Old Toilet Tank

Time to say goodbye to the old tank. Disconnect it from the water supply, remove the bolts holding it to the bowl, and lift it off gently.

3. Replace the Toilet Flange

If the old flange is damaged, it’s time for a new one. Remove the old flange and replace it with a new one, using the included bolts to secure it.

4. Install the Wax Ring

The wax ring is the magic ingredient that keeps water from leaking around the base of the toilet. Place it on the flange, aligning it carefully. Press it down firmly to create a watertight seal.

5. Insert the Toilet Tank Bolts

Slide the toilet tank bolts through the holes in the flange. They should fit snugly but not too tightly.

6. Place the Toilet Tank

Carefully lower the toilet tank onto the bowl, aligning the bolts with the holes in the tank.

7. Tighten the Bolts

Now for the moment of truth! Tighten the bolts using the provided nuts and washers. Don’t overtighten, or you could crack the porcelain.

8. Reconnect Water Supply

Turn the water supply back on and check for leaks around the base of the toilet. If all is well, you’ve successfully replaced your toilet! Give yourself a well-deserved high five.

Closet Bolts: The Anchor of Your Porcelain Throne

So, you’ve successfully navigated the treacherous waters of removing your old toilet tank and have installed a brand-spanking-new one. But what’s this? You’ve got these mysterious bolts staring up at you, ready to secure your royal porcelain throne to the ground. Enter the mighty closet bolts!

What on Earth Are Closet Bolts?

Well, my friend, closet bolts are not to be confused with the place where you keep your skeletons (*or embarrassing socks*). They’re actually the bolts that do the heavy lifting of keeping your toilet bowl firmly planted on the floor. They’re your toilet’s anchor, ensuring that every time you sit down, you don’t get an unexpected submarine ride.

How to Use These Bad Boys

1. Measure twice, cut once: Grab your tape measure and determine the distance between the toilet flange (the base that connects the toilet to the drain pipe) and the floor. This will tell you how long your closet bolts need to be.

2. Chop chop: Time to get out your hacksaw and trim those bolts to size. Remember, it’s always better to error on the side of caution and cut them a little too long. You can always trim them down later.

3. Insert the bolts: Carefully insert the bolts through the holes in the toilet flange. Make sure they’re level and parallel to each other.

4. Place the bowl: Now, with the bolts firmly in place, it’s time to carefully lift the toilet bowl and align it over the bolts. Slowly lower it down, ensuring that the bolts slide into the holes in the bottom of the bowl.

5. Secure the bowl: Grab your wrench and begin tightening the bolts. You want to make them snug, but don’t overdo it or you might crack your toilet. Use a washer on each bolt to prevent scratches.

Tips for the Brave

• Check for leaks: Once you’ve got your toilet all bolted down, turn on the water supply and check for leaks around the base.
• Don’t overtighten: It’s important to tighten the bolts enough to hold the toilet in place, but don’t go overboard. Overtightening can cause the bolts to break or damage the toilet.
• Don’t panic if you make a mistake: If you cut the bolts too short, don’t fret. You can always buy new ones. And if you’ve managed to crack your toilet, well, it might be time for a new one anyway.

Turn Off the Water Supply: The Key to a Leak-Free Toilet Replacement

Before you dive into the thrilling adventure of replacing your toilet, it’s crucial to turn off the water supply. Think of it like a superhero’s secret weapon to prevent a watery catastrophe!

To find the water supply valve, look behind the toilet. It usually resides just above the floor, proudly displaying a shiny handle. Now, here’s the fun part. If the handle turns clockwise, you’re in for a treat! It means the water is saying “bye-bye” to your toilet. If it turns counterclockwise, well, that means it’s saying “hello!”

But wait, there’s more! Once you’ve turned off the water, don’t be surprised if you hear an epic gushing sound. That’s just the remaining water in the tank, flushing itself out like a boss. Don’t worry, it’s perfectly normal and part of the toilet’s pre-replacement routine.

Now that the water supply is firmly under your control, you can confidently proceed with your toilet replacement mission, knowing that your bathroom floor will remain as dry as a desert on a summer’s day.

Replacing a Toilet: Tools and Materials

Step 8: Remove the Old Toilet Tank

Alright, buddy, it’s time to bid farewell to the rusty old tank. Just follow these steps, and it’ll be like it never even existed.

Materials You’ll Need:

• Adjustable wrench
• Utility knife

Instructions:

1. Turn off the water supply. No point flooding the bathroom now, is there? Shut off the little handle at the base of the toilet.

2. Disconnect the water supply line. Use your adjustable wrench to loosen the nuts that hold the tank to the water supply line.

3. Unbolt the tank. The tank is usually bolted to the bowl with two or three bolts. Loosen these bolts using your adjustable wrench.

4. Carefully lift the tank straight up. It’s a bit like trying to remove a stubborn lid from a jar, but don’t force it. If it doesn’t lift easily, check if there are any bolts you’ve missed.

5. Scrape off any old wax. Use your utility knife to remove any old wax from the top of the bowl flange. It’s like cleaning up after a messy party.

6. Clean the rim of the bowl. Use a damp cloth to wipe down the rim of the bowl to remove any dirt or debris. A clean surface will make it easier to get a good seal with the new tank.

And voila! You’ve successfully removed the old toilet tank. Don’t worry if there’s a bit of spillage, it’s all part of the plumbing adventure. Now it’s time to make way for a sparkling new tank that’ll make your bathroom shine like a diamond!

Replace the Toilet Flange: Let’s Give Your Toilet a Solid Foundation

Replacing a toilet may seem like a daunting task, but with the right tools and materials, it’s easier than you think. One crucial step in the process is replacing the toilet flange, the base that connects your toilet to the drain pipe. If your old flange is damaged or warped, it’s time to give your toilet a new foundation.

Imagine your toilet as a wobbly bridge that’s about to collapse. Unless you reinforce the base, your porcelain throne will become a leaky nightmare. That’s where the toilet flange comes in. It’s like the unsung hero that keeps your toilet firmly in place, preventing it from going on a watery adventure.

Steps to Replace Your Toilet Flange:

1. Disconnect the water supply: Turn off the water supply to your toilet. This step is essential to avoid any unwanted surprises.

2. Remove the old flange: Using a hacksaw, carefully cut through the closet bolts that secure the toilet to the floor. Then, wiggle the toilet gently to break the old flange free.

3. Clean the area: Once the old flange is removed, clean the area around the drain pipe thoroughly. This will ensure a proper seal for your new flange.

4. Install the new flange: Align the new toilet flange over the drain pipe and insert the bolts. Tighten the bolts until the flange is secure.

5. Reconnect the toilet: Place the toilet over the new flange and reconnect the closet bolts. Tighten the bolts until the toilet is snug against the floor.

6. Reconnected the water supply: Turn on the water supply and check for leaks around the base of the toilet. If you find any leaks, adjust the bolts or tighten the wax ring until everything is sealed.

And there you have it! Your toilet now has a solid foundation, preventing it from becoming a wobbly, leaky mess. Congratulations, you’re one step closer to a refreshed and functional bathroom.

Installing the Wax Ring: The Secret to a Watertight Toilet

Alright folks, we’ve come to the crucial step: installing the wax ring. This magical donut of wax is what keeps your toilet from turning your bathroom into a miniature water park. So, let’s dive in and make this installation a piece of cake!

Step 1: Prep Your Porcelain Throne

Before you plop that wax ring on, give your toilet flange a good cleaning. Use a rag or sponge to wipe away any dirt or grime. This will ensure a solid seal and prevent any unwelcome leaks.

Step 2: Open the Wax Ring’s Package

Now, carefully open the package of the wax ring. It’s like opening a present, but instead of a toy, you’re getting a seal of watertight bliss.

Step 3: Apply the Wax Ring

Place the wax ring on the toilet flange, centering it perfectly. Smooth it down gently with your hand, making sure the wax fully covers the flange. Pro tip: If you’re feeling fancy, you can Warm up the wax ring with a hair dryer to make it more pliable.

Step 4: It’s Party Time for the Toilet

Carefully lift your toilet bowl and gently place it on the wax ring. Remember to be the toilet whisperer and treat it with utmost care. Once it’s in place, give it a little wiggle to ensure it’s centered and the wax has made a full seal.

Congratulations, Wax Ring Warrior!

You’ve successfully installed the wax ring, creating a watertight barrier between your toilet and the floor. Now, go ahead, flush with pride knowing that your throne is leak-free.

Inserting the Toilet Tank Bolts: A Crucial Step for a Leak-Free Flush

Tools You’ll Need:

• Adjustable wrench

Materials You’ll Need:

• Toilet tank bolts

Alright folks, let’s dive into the magical world of toilet tank bolts. These bad boys are like the unsung heroes – they keep your toilet tank securely attached to the bowl, ensuring that your flushes are smooth and leak-free.

So, how do you insert these bolts? It’s easier than you think. First, grab your trusty adjustable wrench and your toilet tank bolts. Place the bolts through the holes in the toilet flange, which is the base that connects the toilet to your drainpipe. Make sure the bolts are snug but don’t crank them down like a maniac just yet.

Pro Tip: Remember those washers we talked about earlier? Well, they’re like little shields for your porcelain throne. Slide them onto the bolts before you put them through the holes to prevent any scratches or damage.

Place the Toilet Tank: A Balancing Act

So, you’ve got the flange, the wax ring, and the bolts all sorted. Now comes the grand finale: placing the toilet tank. This is where the rubber meets the porcelain, so follow these steps carefully:

1. Align the Tank: Grab the toilet tank and carefully lift it over the bowl. Line up the bolt holes in the tank with the corresponding bolts coming through the flange.

2. Lower Slowly: Don’t just plop it down! Gently lower the tank onto the bowl, being mindful not to crack or damage the porcelain.

3. Secure the Tank: Using your trusty adjustable wrench, tighten the nuts that hold the bolts in place on the bottom of the tank. Don’t over-tighten, or you’ll risk cracking the tank.

4. Check for Wobbles: Once the tank is secured, gently wiggle it from side to side. If it moves, carefully tighten the nuts a bit more.

Avoid Wiggly Woes:

Remember, a wobbly toilet tank is like a loose tooth—it’s annoying and can cause more problems down the road. Ensure a solid connection to prevent it from rocking and rolling like a ship in a storm!

Replacing a Toilet: Tightening the Bolts for a Leak-Free Throne

It’s time to give your trusty throne a new lease on life! You’ve got all the tools and materials ready, and you’ve made it to the final hurdle – tightening those pesky bolts. Don’t worry, this is where the magic happens, and we’ll guide you through it like a pro.

Now, grab those nuts and washers you so thoughtfully purchased. The washers will act as the unsung heroes, protecting your porcelain from any sneaky scratches. Slide them onto the toilet tank bolts and get ready to give them a good snuggle.

Next, place the nuts onto the bolts from the underside of the tank. We want to make sure everything’s nice and secure. Use a wrench to give the nuts a gentle twist, but don’t go overboard – you don’t want to crack your new buddy.

Now, for the moment of truth: check for leaks. Turn on the water supply slowly and keep an eagle eye on the base of the toilet. If you spot any liquid rebels making a break for it, simply tighten the nuts a tad more. Remember, it’s a delicate balance between snug and not too snug.

And there you have it, folks! You’ve successfully tightened the bolts on your new toilet. Now all that’s left is to sit back, relax, and give yourself a pat on the back for being a DIY master. Your throne shall rule again for many a flush to come.

Replacing a Toilet: Tools and Materials You’ll Need

Getting ready to tackle a toilet replacement? Don’t worry, we’ve got you covered with a detailed list of all the tools and materials you’ll need. Let’s dive right in!

Tools

1. Adjustable Wrench (8): Meet your new best friend for loosening and tightening those pesky bolts.
2. Hacksaw (7): Ready to cut those closet bolts to size? This little guy’s got your back.
3. Measuring Tape (8): Measuring twice, cutting once is the name of the game.
4. Utility Knife (7): Say goodbye to excess wax and unwanted sealant with this trusty sidekick.

Materials

1. Toilet Flange (10): The foundation your toilet sits upon, this part’s crucial!
2. Toilet Tank (10): Where the water resides, this upper half is a must-have.
3. Wax Ring (10): The watertight seal that keeps disasters at bay.
4. Toilet Tank Bolts (10): Connect the tank to the bowl, these babies hold it all together.
5. Washers (10): Protect the porcelain from scratches, these little helpers are key.
6. Nuts (10): Secure those tank bolts from the bottom, they’re the glue that holds everything in place.
7. Closet Bolts (10): Anchoring your toilet bowl to the floor, these bolts are the backbone of stability.

Reconnecting the Water Supply (9)

Last but not least, it’s time to bring back the H2O! Turn on that water supply and give the base of your toilet a thorough inspection. If all’s well, you’ve successfully conquered the toilet swap. Give yourself a pat on the back, my DIY warrior!