Tub Drain Vent: Prevent Sewer Gas Leaks

Tub Drain Vent

A tub drain vent is a pipe that allows air to flow into the drainage system when water is drained from the tub. This helps to prevent negative pressure from building up in the system, which can cause the water to siphon out of the trap and create a sewer gas leak. Tub drain vents are typically connected to a vent stack, which is a vertical pipe that runs up through the roof and allows gases to escape.

Comprehensive Plumbing Basics Guide: Fixtures and Appliances

Everybody needs a good bathroom, right? Well, let’s talk about the essential components that make your bathroom a comfortable and functional space: fixtures and appliances!

First off, let’s dive into bathtubs. From luxurious soaking tubs to space-saving shower-tub combos, there’s a tub for every style and need. Want to sink into a deep, relaxing bath? Opt for a freestanding or built-in soaking tub. Need to conserve space? A shower-tub combo is your best bet.

Next up, showers. Say goodbye to cold showers! From simple fixed showerheads to sophisticated rainfall showers, there’s a shower to match your taste. If you’re all about the powerful downpour, go for a rainfall shower. Prefer a gentle sprinkle? A fixed showerhead will do the trick.

Don’t forget drains. They might not be the most glamorous part of your bathroom, but they’re essential for keeping things flowing smoothly. Different types of fixtures require different drains, so make sure you choose the right one for your bathtub or shower.

And last but not least, P-traps. These unsung heroes are the gatekeepers of your pipes, preventing sewer gases and unpleasant odors from invading your bathroom. A P-trap is a U-shaped section of pipe that holds water, creating a barrier against these pesky fumes.

So, whether you’re remodeling your bathroom or just curious about the plumbing behind your daily showers and baths, understanding fixtures and appliances is key. Remember, a happy bathroom means a happy you!

Venting: The Airway of Your Plumbing

Hey there, plumbing enthusiasts! Let’s dive into the world of venting, the unsung hero of your drainage system. It’s like the lungs of your plumbing, ensuring a smooth flow and preventing some nasty surprises.

You see, when water rushes down your drains, it creates a pressure vacuum that can suck the water out of your P-traps, those U-shaped pipes under sinks and toilets. Without water in the P-traps, foul smells from your sewer pipes can creep into your home, a fragrant welcome that no one enjoys.

That’s where vent pipes come to the rescue. They’re like tiny chimneys for your drains, drawing air into the system to equalize the pressure and prevent trap seal loss. And guess what? Roof vents are the grand finale, providing an exit point for the air to escape.

Without proper ventilation, your drainage system becomes a breeding ground for clogs, leaks, and those dreaded sewer gas odors. It’s like trying to breathe through a straw; things just don’t flow as they should.

So, keep your plumbing system happy and healthy by ensuring it has the ventilation it needs. Don’t let blocked or insufficient vents suffocate your drains! Make sure your vent pipes and roof vents are clear and functioning properly to keep the air flowing and your drains running smoothly.

Comprehensive Plumbing Basics Guide

Codes and Standards: The Unsexy but Essential Part of Plumbing

Plumbing codes and standards are like the rules of the game when it comes to keeping our water flowing smoothly and safely in our homes. Sounds boring, right? But these rules are actually crucial for ensuring your plumbing system is up to par and not putting your family’s health at risk.

Think of it this way: Imagine a soccer game without any rules. It would be chaos, with players running wild and kicking the ball everywhere. In the same way, plumbing without codes and standards would be a disaster, with leaks, clogs, and potential hazards lurking around every corner.

So, who makes these codes and standards? There are three main players in the plumbing code world:

• The International Plumbing Code (IPC): This code is used by most states and municipalities in the United States. It covers everything from fixture requirements to vent sizing.
• The Uniform Plumbing Code (UPC): This code is used in some western states and parts of Canada. It’s similar to the IPC but has some slight differences.
• Local codes: In addition to national codes, many cities and counties have their own local codes that must be followed. These codes often address specific local issues, such as earthquake preparedness or water conservation.

Complying with plumbing codes and standards is not just a matter of following the rules. It’s about protecting your family, your home, and your community. So, if you’re ever tempted to cut corners on plumbing work, remember the importance of these _unsexy_ but essential rules of the game.

Plumbing’s Airflow Anthem: Keep Your Drains Clog-Free and Humming

Picture this, my fellow plumbing enthusiasts: you’re taking a leisurely shower, reveling in the soothing warmth of the water. Suddenly, a chorus of gurgling and sputters interrupts your serenity, signaling the dreaded clog. Cue the panic and the frantic search for a plunger.

But hold your wet socks, my friend! The secret to clog-busting lies in something as subtle as airflow. Let’s embark on an airflow adventure to keep those drains flowing like the Mighty Mississippi.

Negative Pressure: The Clog-Fighting Force

Imagine your plumbing system as a symphony of pipes and vents. When water rushes down the drain, it creates a negative pressure that sucks air into the plumbing system through specially designed vent pipes. This negative pressure acts like a trusty shield, preventing drain traps from losing their precious seal.

Why is the seal so important? It’s like a fortress guarding your home from nasty smells and sewer gas infiltrators. When the seal remains intact, it traps water in the drain trap, preventing foul odors from escaping and wreaking havoc in your bathroom.

Ventilation: The Airflow Superhero

Now let’s give a round of applause to the ventilation heroes in our plumbing universe: roof vents and plumbing vents. These unsung heroes work diligently to bring fresh air into the system, creating a harmonious airflow that keeps drains unclogged and odors at bay.

Think of it this way: if your plumbing system is a car, ventilation is the air conditioning. It keeps the air flowing and prevents the engine (your drains) from overheating and seizing up.

So, the next time you hear that ominous gurgling sound, don’t be alarmed. Just remember the power of airflow and ventilation, the plumbing dynamic duo that will keep your drains singing sweetly.

Negative Pressure: The Trouble with Trapped Air

Picture this: you’re taking a relaxing bath when suddenly, bam! A horrendous smell hits your nose. You look down and see bubbles rising from the drain, your bathwater swirling down like a whirlpool. The reason? Negative pressure, the naughty culprit behind lost trap seals and stinky drains.

Trap seals are like guardians protecting your home from sewer gases. They’re the water-filled part of drains that block those nasty smells from creeping up. But when negative pressure strikes, it sucks that water out, leaving the drain open for gas to escape.

Here’s how it happens: when you drain a sink or tub, whoosh! air rushes in to fill the void. But if there’s not enough air coming in through a vent pipe, the rushing water creates a vacuum effect. This vacuum sucks water out of the trap seal, breaking its defense against sewer gas. And that’s when the stink fest begins.

So, how do we stop this smelly sabotage? Vent pipes! These vertical pipes provide an air supply to the drain, preventing negative pressure from wreaking havoc. Think of them as the superheroes of trap seals. They allow air to flow in and out, ensuring those guardian seals stay filled and ready to block the yuck.

Gas Buildup Prevention: Guarding Your Home Against Silent Killers

Imagine this: You’re enjoying a relaxing night’s sleep when an insidious enemy lurks in the shadows, threatening to take your breath away—toxic gases like carbon monoxide and sewer gas. These silent assassins can seep into your home through tiny cracks or malfunctioning plumbing systems, putting your health at risk.

But fear not, my plumbing hero! By ensuring proper ventilation, you can banish these gaseous foes and keep your family safe. Ventilation may not be the most glamorous aspect of plumbing, but it’s like the unsung superhero of your home, keeping the air fresh and your lungs breathing easy.

Here’s how it works: Ventilation systems draw in fresh air from the outside, replacing the stale air inside your home. This constant airflow creates negative pressure, which literally sucks out toxic gases from your plumbing fixtures and sends them packing. Think of it as a giant vacuum cleaner, but instead of dust bunnies, it’s sucking up harmful gases that could otherwise wreak havoc on your health.

So, how do you ensure proper ventilation? It’s all about the right balance. Too little airflow, and negative pressure can’t do its job; too much airflow, and you end up wasting energy. That’s where vent pipes and roof vents come into play. These unsung heroes provide the necessary pathways for fresh air to enter and stale air to escape, creating a harmonious airflow that keeps your home safe and your lungs happy.

Remember, a well-ventilated home is a healthy home. By making ventilation a priority, you’re not just taking care of your plumbing—you’re safeguarding your family’s well-being. So, next time you’re tackling a plumbing project, don’t forget the power of ventilation. It’s the silent protector, the guardian of your home’s air quality, and the unsung hero that keeps you breathing easy.

Plumbing 101: Piping Materials Decoded

In the world of plumbing, pipes are the unsung heroes, quietly carrying water throughout your home. But don’t let their hidden nature fool you—choosing the right pipe material is crucial for a long-lasting, efficient plumbing system. So, let’s dive into the dizzying world of pipes and make you a plumbing pro!

PVC: The Plastic Wonder

Polyvinyl chloride (PVC) pipes are the darlings of the plumbing world. They’re lightweight, durable, and remarkably affordable. Plus, they resist corrosion like a champ and are a cinch to install. But hold your horses before ordering a PVC extravaganza—they’re not heat-resistant, so steer clear of hot water lines.

ABS: PVC’s Tough Cousin

Acrylonitrile Butadiene Styrene (ABS) pipes are PVC’s beefier brother. They share the same lightweight and corrosion-resistant qualities, but ABS pipes can handle higher temperatures. Plus, they’re even stronger than PVC, making them a great choice for drain lines, especially the ones that deal with hot, greasy dishwater.

Cast Iron: The Classic Powerhouse

Cast iron pipes are the granddaddies of the plumbing world. They’re heavy, durable, and can handle extreme temperatures. In fact, cast iron pipes have been around for centuries, and you’ll still find them in many older homes. However, they’re not as easy to install and can rust if not properly maintained.

Copper: The Timeless Choice

Copper pipes are the gold standard of plumbing materials. They’re corrosion-resistant, durable, and can handle both hot and cold water. Plus, copper is naturally antimicrobial, so it helps keep your water squeaky clean. The only downside? Copper pipes are more expensive than the plastic options, and they require professional installation.

Choosing the Perfect Pipe

Now that you’re armed with this piping knowledge, you can make an informed decision when it comes to your plumbing system. Consider factors like the temperature of water, the type of fixture, and your budget.

Remember, the right pipe material can make all the difference in the performance and longevity of your plumbing system. So, choose wisely, my friend, and let your pipes sing with happiness for years to come!

Tools and Equipment: The Plumber’s Arsenal

Every superhero needs their trusty gadgets, and plumbers are no exception! When it comes to plumbing repairs, having the right tools can make all the difference between a quick fix and a major headache. So, let’s dive into the essential tools that every plumber’s toolbox should have:

• Drain Snakes: These wriggly heroes are the snake charmers of the plumbing world, slithering down drains to clear clogs and restore flow. Whether it’s tangled hair or food monsters, these snakes will banish them with ease.

• Pipe Wrenches: The heavy-duty muscle of the plumbing crew, these bad boys grip pipes with the strength of a python and make even the most stubborn connections yield. Think of them as the Hulk of the toolbox, ready to smash any pipe resistance.

• Hacksaws: When you need to cut pipes precisely, these steel-toothed beavers will do the job. With a little elbow grease, they can tackle copper, PVC, or even cast iron pipes like a pro. Just don’t forget the safety goggles!

• Plumber’s Putty: This wonder-working clay is the plumber’s secret weapon against leaks. It’s like the duct tape of the plumbing world, sealing gaps and preventing water from escaping. Just remember, it’s not edible, so don’t go nibbling on it!

• Caulking Guns: These trusty dispensers are the architects of waterproof barriers. They apply caulking around sinks, toilets, and other fixtures, creating a seal that keeps moisture out and problems at bay. Just think of them as the raincoats of the plumbing world, protecting your home from water damage.

Moisture Control: Banish Leaks, Mold, and Dampness

You know that leaky faucet that always drips, the moldy grout in the shower, and that musty smell in the basement? Yeah, those aren’t just annoyances—they’re signs of sneaky moisture lurking in your plumbing system. Let’s put on our Sherlock Holmes hats and investigate how to moisture-proof our homes!

The Perils of Moisture:

Moisture is the culprit behind a host of plumbing nightmares, like:

• Leaks: Dripping faucets, broken pipes, and leaky toilets can waste gallons of water and damage your floors.
• Mold: This nasty fungus thrives in damp environments, causing respiratory problems, allergic reactions, and a generally unwelcoming atmosphere.
• Damage: Excess moisture can rot wood, buckle drywall, and corrode metal fixtures.

Moisture Management 101:

Preventing moisture problems is like playing whack-a-mole with water droplets. Here are our top tips:

• Inspect Regularly: Check your plumbing system for leaks, loose fittings, and any signs of moisture damage.
• Fix Leaks Promptly: Don’t let those sneaky drips turn into gushing waterfalls. Repair leaks immediately to prevent further damage.
• Ventilate Bathrooms: Exhaust fans in bathrooms help remove moisture from the air, reducing the risk of mold and mildew.
• Install a Dehumidifier: These handy devices absorb excess moisture from the air, keeping your home dry and comfortable.
• Use Moisture-Resistant Materials: Choose waterproof or water-resistant materials for bathroom and basement walls, floors, and fixtures.

Moisture-Proofing Your Basement:

Basements can be a moisture magnet, especially if they’re below grade. Here are some tricks to keep your basement dry:

• Grade Away from Your Home: Make sure the ground slopes away from your home’s foundation to prevent water from pooling around it.
• Install a Sump Pump: Sump pumps remove water from basements and crawl spaces that collect water due to rain, groundwater, or flooding.
• Seal Cracks and Joints: Inspect your basement walls and floors for cracks and seal them with waterproof caulk or sealant.

Remember, moisture control is an ongoing battle. By following these tips, you can evict moisture from your home and enjoy a dry, healthy, and comfortable living space.

Sump Pumps: Your Basement’s Watery Superhero!

You know that feeling when you walk down to your basement and realize it’s soaked? Yeah, not fun. Enter the mighty sump pump, your friendly neighborhood water-removal machine!

What the Heck Is a Sump Pump?

Think of a sump pump as your basement’s personal lifeguard, watching over it from a small pit in the floor. When water levels rise, it’s like the pump says, “Not on my watch!” and starts pumping that excess H2O out of there.

Types of Sump Pumps

Just like superheroes have different powers, so do sump pumps. There are three main types:

• Submersible Pumps: These guys live in the water, completely submerged. They’re super quiet and can handle larger amounts of water.
• Pedestal Pumps: These pumps sit above the water, with their motor on top. They’re louder than submersibles but can still handle a decent amount of water.
• Battery Backup Pumps: These are the superheroes of superheroes! They kick in when the power goes out, ensuring your basement stays dry even during emergencies.

Installation and Maintenance: Not as Scary as It Sounds

Don’t worry, installing a sump pump is not rocket science. Just make sure the pump is the right size for your basement and that it has a discharge line to send the water away from your house.

As for maintenance, it’s a piece of cake. Just check your pump every few months to make sure it’s working properly and clear any debris that might get in its way. Think of it as giving your basement superhero a regular checkup.

Peace of Mind: Priceless

With a sump pump on your team, you can rest easy knowing that your basement is protected from water damage. It’s like having a little peace of mind guardian keeping your home dry and happy. Remember, a dry basement is a happy basement!

Ejector Pumps: Function and maintenance of pumps that discharge wastewater from below-grade fixtures.

Ejector Pumps: The Unsung Heroes of Basement Bathrooms

Imagine this: you’re enjoying a relaxing bubble bath in your basement bathroom when suddenly, the water starts backing up into the tub. Panic sets in as you realize your toilet is overflowing too! What gives?!

Enter the unsung heroes of basement bathrooms: ejector pumps. These ingenious little devices are the saviors of any below-grade fixture that dares to drain wastewater uphill.

How They Work

Ejector pumps are like mini pumps that are submerged in a waste pit. When wastewater enters the pit, the pump turns on and uses a venturi effect to create a vacuum. This vacuum sucks the wastewater out of the pit and forces it into a discharge pipe that leads uphill to the sewer line.

Maintenance Made Easy

Keeping your ejector pump in tip-top shape is crucial for a hassle-free basement bathroom experience. Here’s what you need to know:

• Check the pump regularly: Every few months, open the pit cover and check for any debris or clogs.
• Test the pump manually: About once a year, disconnect the pump from the electrical outlet and pour a bucket of water into the pit to make sure it’s working properly.
• Replace the pump when needed: Ejector pumps have an average lifespan of 7-10 years. If your pump is showing signs of age, it’s best to replace it before it fails and leaves you with a soggy mess.

Ejector pumps are essential for keeping your basement bathroom functional and free from unpleasant surprises. By understanding their role and following simple maintenance steps, you can ensure they operate smoothly, leaving you with a clean, dry, and well-drained space to enjoy your bubble baths in peace.

Backflow Preventers: Importance of backflow prevention devices for preventing water contamination.

Backflow: The Invisible Threat in Your Pipes

Imagine your home’s plumbing system as a two-way street for water. Normally, water flows smoothly from the supply to the fixtures and drains away seamlessly. But what happens when this traffic pattern gets reversed? That’s where backflow comes into play, a sneaky culprit that can contaminate your water supply.

Backflow occurs when water or contaminants flow backward into the clean water system, potentially introducing bacteria, chemicals, or even sewage into your taps. It’s like a party crasher gate-crashing your plumbing system, bringing uninvited guests you don’t want.

The Backflow Bully

The worst part about backflow is that it’s often silent and invisible. You won’t hear any loud noises or see any dramatic leaks. It’s like the plumbing equivalent of a ninja, sneaking its way into your pipes without you noticing.

But just because you can’t see it doesn’t mean it’s not there. Backflow can cause serious health problems, including gastrointestinal issues, skin infections, and even more severe conditions. It’s like having a ticking time bomb in your bathroom.

The Backflow Preventers: Your Plumbing Superheroes

Thankfully, there are valiant knights in shining armor called backflow preventers ready to come to your rescue. These ingenious devices are like gatekeepers, ensuring that water flows only in the correct direction. They stand guard at the entrance of your plumbing system, stopping any contaminated water from infiltrating your clean supply.

Backflow preventers come in various types, each suited to specific plumbing situations. Choosing the right one is like selecting the best superhero for the job. And just like superheroes, backflow preventers need to be inspected and maintained regularly to keep them in tip-top shape.

Protect Your Plumbing, Protect Your Health

Installing and maintaining backflow preventers is like wearing a seatbelt for your plumbing system. It’s a small investment that can prevent major disasters and keep your water safe. So, don’t be caught off guard by the invisible threat of backflow. Embrace the power of backflow preventers and give your plumbing system the protection it deserves.

Carbon Monoxide Poisoning: A Stealthy Killer

Imagine this: You’re cozying up in your home, enjoying a warm fire or relaxing in a hot bath. Unbeknownst to you, a deadly threat lurks within your walls – carbon monoxide.

What the Heck is Carbon Monoxide?

Carbon monoxide (CO) is an invisible, odorless gas that can be deadly even in small doses. It’s produced by the incomplete burning of fuels like gas, oil, and wood. And get this: it can sneak into your home through appliances like furnaces, water heaters, and fireplaces.

How to Spot the Signs of the Silent Killer

The symptoms of carbon monoxide poisoning are subtle and can be easily mistaken for other illnesses. Keep an eye out for:

• Headaches: Throbbing headaches that don’t respond to pain relievers
• Nausea: Feeling like you’re on a rollercoaster without the thrill
• Dizziness: Feeling like you’re on a boat in a storm
• Confusion: Losing your train of thought like a lost hiker
• Shortness of breath: Gasping for air like a fish out of water

If You Suspect CO Poisoning, Act Fast!

If you think CO may be lurking in your home, don’t hesitate to take action. Open windows and doors immediately to create ventilation. Then, get everyone out of the house and call 911 or your local emergency services.

How to Protect Yourself from the CO Monster

Here’s how you can keep that pesky CO at bay:

• Install carbon monoxide detectors: These trusty little devices will sound an alarm if CO levels become dangerous.
• Keep your appliances serviced regularly: A well-maintained furnace, water heater, and fireplace can prevent CO leaks.
• Never use a gas stove or oven to heat your home: This is a huge no-no, folks!
• Educate your family: Teach your loved ones about the dangers of CO and what to do if they suspect poisoning.

Remember, carbon monoxide poisoning is a sneaky threat, but with the right knowledge and precautions, you can keep yourself and your family safe. So, spread the word, and let’s banish the CO monster together!

Sewer Gas Leaks: Unmasking the Silent Foe

If you’ve ever caught a whiff of that pungent, rotten egg smell in your home, you may have encountered a sewer gas leak. Don’t panic just yet! We’re here to uncover the health risks and reveal the secrets to keeping your castle gas-free.

Health Hazards: A Gas to Worry About

Sewer gas is a cocktail of hazardous gases that can infiltrate your home from faulty plumbing or septic systems. This noxious brew includes hydrogen sulfide, methane, and carbon monoxide. Inhaling these gases can cause a range of symptoms, from the mildly inconvenient (headaches, nausea) to the potentially life-threatening (respiratory distress, organ damage).

Preventing Leaks: Battling the Odorous Invader

Now that we’re all appropriately spooked, let’s talk about how to seal your home from these unwelcome guests.

• Inspect and Seal Toilets: Check the wax ring, which forms a watertight seal around the toilet base. Replace it if it’s cracked or damaged.

• Clean Drains and P-traps: Remove any debris blocking your drains and ensure that P-traps (those U-shaped pipes) are filled with water to prevent gases from escaping.

• Use Backflow Preventers: These ingenious devices block gas flow back into your home from drains and sewer lines.

• Ensure Adequate Ventilation: Open windows and run fans in bathrooms and kitchens to promote airflow and dilute any gas build-up.

If You Suspect a Leak: Call the Cavalry

If you’re still experiencing that eggy aroma, don’t hesitate to call a licensed plumber. They’re the plumbing ninjas who can identify the source of the leak and seal it fast.

Remember: Sewer gas leaks are nothing to mess with. By following these precautions, you can protect your home and your health from this silent but deadly foe.

Scalding Water: Avoid the Ouch!

Ever jumped into a hot shower only to yelp like a banshee because the water felt like lava? Yeah, we’ve all been there. But it’s no laughing matter! Scalding water can cause serious burns that may require medical attention.

To keep your skin safe and your dignity intact, here are a few simple steps you can take:

1. Check the Water Temperature First: Before you step in, give the water a quick feel with your elbow or toes. It should feel warm, not scorching. Use a thermometer to make sure it’s less than 120°F (49°C).

2. Start with Cold Water: Start by turning on the cold water first, then gradually mix in the hot until you reach the desired temperature. This way, you won’t accidentally unleash a river of boiling water onto your unsuspecting body.

3. Install Anti-Scald Devices: These clever gadgets are like safety nets for your plumbing. They limit the maximum water temperature coming out of your taps and shower heads. Talk about peace of mind!

4. Be Extra Careful with Kids and the Elderly: Their skin is more delicate, making them more susceptible to scalds. Supervise young children in the bathroom and install grab bars for seniors to prevent falls that could lead to burns.

5. Don’t Ignore Leaking Faucets: A dripping faucet is not just annoying; it can also increase the risk of scalding. Fix it promptly to avoid a sudden blast of hot water when you least expect it.

Remember, being aware and taking precautions can save you from a painful and embarrassing scalding experience. So, next time you’re in the shower, take a moment to check the water temperature. It’s a small step that can make a big difference in keeping your skin safe and happy.

Slip and Fall Hazards: Keeping Your Bathroom Slip-Free

Oh, the slippery slope of bathroom accidents! We’ve all been there—a moment of carelessness, and you’re sprawled on the cold, wet tile like a graceful seal. But fear not, my friends, for today we’re diving into the depths of slip-and-fall prevention.

Imagine this: You’re stepping out of the shower, feeling refreshed and ready to conquer the day. But as you place your foot on the treacherous tile, fate strikes! Your feet slide, and bam! You’re down, bruised, and possibly even with a concussion. The moral of the story? Bathrooms are not a place for impromptu tobogganing.

So, how do we banish these bathroom hazards? Let’s take a closer look:

• Non-Slip Surfaces: Invest in a slip-resistant mat or shower curtain. These provide extra grip and stability, making it harder for you to do an unintentional triple axel on the tile.

• Grab Bars: These are like your bathroom’s best friend, offering a sturdy hold when you’re stepping in or out of the shower or bathtub. They prevent those awkward moments where you’re clinging to the showerhead for dear life.

• Good Lighting: Dim lighting can make it difficult to see potential hazards. Ensure your bathroom is well-lit to avoid any mishaps in the dark.

• Regular Cleaning: Keep your bathroom spick and span by regularly cleaning the floor to prevent soap buildup and slippery surfaces. A clean bathroom is a slip-proof bathroom.

• Dry Immediately: After each shower, squeegee or towel off the floor to remove excess water. This reduces the risk of slips and provides a safer environment for your unsuspecting feet.

By following these tips, you can turn your bathroom into a slip-free zone, ensuring that your daily showers are more about relaxation and less about unplanned gymnastics.